• Turntable start button
• Turntable start button
• Film elevator up button to wrap with the upper package.
• Film elevator down button to wrap with the lower package.
• Film elevator stop button to stop lifting.
• Circle of bottom wrapping setting
• Turntable start button to start wrapping.
• Turntable stop button stop slowly and cut the film.
• Manual mode
• Auto mode in normal operation
• Film tension adjustment button
• Turntable speed adjustment button
• Film elevator speed adjustment button
• Power switch is safety mechanism for the any damage due to operator improper operation.
• Emergency stop button
• Self-Protection Switch
• Film tension control is applied with mechanical flexible braking.
• Partial wrapping reinforcementto increase wrapping strength on part of a package.
• Photocell sensing device to detect the package height.
• Wrapping methods fully automatic otherwise manual operation in trouble.
• Self-testing system Easily do maintenance and save repair time.
• Pre-stretch function:
• Pressure plate (Optional ).
• Ramp (Optional ).

This new shrink system gives you complete automatic, Competitively price, trouble free services. It's a good friend for big packs purpose of tins, bottles, cans etc. Shrink tunnel SSS-5040 is built with a variable speed conveyor with silicon covered rollers. Air blower gives proportion of re circulated hot air to suit various package sizes, shapes, and types and thickness of film. Additional cooling air blower special for PE shrink film. Automatic sleeve wrapping machine SSS-5040S gives you a complete finger-free, the photo valve controls the position and quantity of products which conveyed by heavy duty conveyor. The heavy duty cast steel Teflon covered sealing jags feature a retune height adjustment. The loading platform adjusts by hand for various package width. The film cradle adjust by hand for different roll widths.

TECHNICAL SPECIFICATION

1. Dimension of the machine 3mtrs x 1.2mtrs x 2.4mtr height.
2. Conveying system with a feed screw arrangement – 3 mtr long.
3. 0.5HP Hindustan make geared motor for conveyor.
4. 0.25HP Hindustan make Geared motor for unwind nip arrangement
5. 0.25HP Hindustan make geared motor for feed screw
6. 0.25HP Hindustan make motor for sleeve dropper.
7. Pneumatics of Festo/Janatics/SMC make.
8. Electric accessories of siemens/L&T/standard make.
9. Variable frequency drive, Delta make.
10. PLC of "Mitsubishi/"Messung" make.
11. "Mitsubishi "make servomotor.
12. "1.2 meter long tunnel with MS Body structure
13. 2 nos 0.25HP blower motor

MACHINE DESCRIPTION

1. Roll type sleeve should be loaded on the unwind station.
2. Web is unwound from the unwind unit through a unwind nip arrangement.
3. This web is then passed through a dancer unit; this unit maintains the required tension on the web.
4. Then the web passes through a decreaser, in this unit the web is opened fully.
5. This web is then passed towards the cutting unit through a feed nib arrangement.
6. In the cutting unit the sleeve is cut to the required length
7. This sleeve is then pushed over the body of the bottle through a sleeve pusher arrangement.
8. Bottles are feeded to the machine through a feed screw arrangement for proper pitching.
9. Bottles with the sleeve applied over the body comes out from the other side of the machine and pass through the shrink tunnel, where it gets shrinked